Calibration during Ride?

https://www.microsoft.com/nl-be/store/p ... 40kx?rtc=1

Moderators: mcorn, malfukt, Nasz, Lunatix

Post Reply
butterkeks
Posts: 7
Joined: Tue Nov 13, 2018 7:58 am

Calibration during Ride?

Post by butterkeks » Fri Dec 07, 2018 11:36 am

Hello,

it seems a trainer calibration is not possible during a ride. With zwift, i just ride 10mins and then do a quick calibration when the trainer is warm. But in TDA i have to use another App for that - but TDA is keeping the BT connection. So I must exit TDA without the possibility to resume the ride - that's not so practical.

thebigoneinfront
Posts: 2874
Joined: Sun Oct 04, 2009 6:18 pm
Location: Ludwigshafen/Rhine, Germany

Re: Calibration during Ride?

Post by thebigoneinfront » Fri Dec 07, 2018 2:48 pm

Whith the Genius I had and using TTS, I used to adjust the tyre pressure to 8.0 bar before riding and to calibrate after riding. The differences in calibration numbers (those were formerly displayed until replaced in TTS by that green/red bar) were so small that finally I only calibrated every few weeks. I think that if you keep the pressure constant calibration just accounts for gradual tyre wear and there‘s no need to calibrate prior to every ride. (Of course, any turning of the roller pressure adjustment screw below the brake lever requires a re-calibration.)

Post Reply

Return to “Tacx Desktop app (TDA)”

Who is online

Users browsing this forum: No registered users and 12 guests