Tacx Genius Squeak & Slipping

[alastair825]

Hi

I’m having trouble with my turbo trainer squeak and slipping, I have provided a link to a video to show this problem below

http://www.youtube.com/watch?v=AcBgiKCalFU

My current setting for the turbo trainer are tyre at 120 psi and set to 8.3 in tts4 with slot 2. This start to happen when I go over 5% - 6% incline.

I have recently bought the Lake District dvd and it is impossible complete with the tyre slipping and squeaking

Please can someone help?

Alastair

[Howsteepisit]

I never managed to get my Tacx tire to not slip right now I am using a worn ruffy tuffy tire at120 and getting no slip. Longevity is unknown

[malfukt]

First try different tyre..

[alastair825]

Which tyre would you recommend I have the blue tacx one atm.

[Tony Alaska USA]

alastair825
are you sure you have the motorbreak in the right slot? I know that for some this made a difference. I am almost sure I have mine in the recommended middle slot for a standard road bike.

[alastair825]

Hi

I have just checked and it is in slot 2, does anyone else have this problem when going up hill? would someone be able to film themselves going up a hill, for an example one in the Lake District DVD so I can hear the sounds their turbo trainner makes (Genius if possible)

Alastair

[malfukt]

I have been up that particular hill & many others with my GENIUS, no squeaks

I now use a Continental trainer tyre, i use to use the tacx trainer tyre, it did use to squeak very slightly when a lot of effort put in at very beginning of a ride (first couple of minutes, if i had`nt warmed it up)..

[alastair825]

Hi malfukt, so yours sounds nothing like mine, is your continental tyre black, do you have any other idea what could fix the squeak?

Ali

[Raikko]

with calibration value of 9 and 8 bars on tyre I haven't been able to get it slip once, not even in 16% hills which I drilled yesterday. I'm pretty sure it has something to do with the grip of the tyre? Mine is red vittoria training tyre if that helps at all, very good tyre, have had it for 3 years and still going strong.

Best Regards
Raikko

[Blueberry]

I got kind of a squeacking noise but no slippage on the Genius.

I use an old road tire and from time to time I rub the surface of the tire with degreaser to clean it and make it a little "sticky".

Calibration value is around 7.3 with 8bar tire pressure.

[viner_james]

A little late to ask perhaps but I have the exact same problem. Changed the blue Tacx tyre to a continental GP4000 road tyre ... but pretty much the same problem. Did you resolve this and how?

[frankhertz]

I had a similar issue with a fortius trainer and was able to solve the problem by thoroughly cleaning the roller and the tire with 70% isopropyl alcohol (not rubbing alcohol) and keeping the pressure above 115 psi.

Harry

[viner_james]

Ok - I’ll give it a go - many thanks

[mcorn]

It is also possible that the noise is the stainless steel sleeve over the urethane roller is beginning to come loose. One symptom of that is the noise is worse when it is cold. Without hearing the noise, it is kind of a guess, but sleeve failures are quite common after a couple of years. There is a long "epoxy fix" thread on the forum on how to do a repair.