Flow smart calibration

Moderators: mcorn, Tacx Moderator, Tacx Video Production, malfukt, Steve Newton, Tacx support, Nasz, Lunatix

Post Reply
Vorpal
Posts: 5
Joined: Mon Feb 19, 2018 12:07 am

Flow smart calibration

Post by Vorpal » Wed Mar 21, 2018 9:20 pm

I’m having problems calibrating the flow smart, when I spin it up to 30km to calibrate it will only register 28 km no matter how fast I ride. I have uninstalled and reinstalled the utility app and it has the latest update, would be grateful for any advice on this problem.

User avatar
Alex Masalovich
Moderator
Posts: 1648
Joined: Sun Nov 30, 2014 10:17 pm
Contact:

Re: Flow smart calibration

Post by Alex Masalovich » Thu Mar 22, 2018 10:38 am

What is the current firmware version number in the Tacx utility app? The number must consist of two parts, for example: 3.1.22/0.4.3
Тренируйтесь много, отдыхайте ещё больше!

Vorpal
Posts: 5
Joined: Mon Feb 19, 2018 12:07 am

Re: Flow smart calibration

Post by Vorpal » Thu Mar 22, 2018 2:11 pm

Firmware version 3.1.22/0.4.3

User avatar
Alex Masalovich
Moderator
Posts: 1648
Joined: Sun Nov 30, 2014 10:17 pm
Contact:

Re: Flow smart calibration

Post by Alex Masalovich » Thu Mar 22, 2018 5:20 pm

Was there a similar problem with the previous firmware version?
Тренируйтесь много, отдыхайте ещё больше!

Vorpal
Posts: 5
Joined: Mon Feb 19, 2018 12:07 am

Re: Flow smart calibration

Post by Vorpal » Thu Mar 22, 2018 8:13 pm

Have only had this for 4 months and have been in this firmware version from the start,
The problem has only happened in the last three weeks.

User avatar
Alex Masalovich
Moderator
Posts: 1648
Joined: Sun Nov 30, 2014 10:17 pm
Contact:

Re: Flow smart calibration

Post by Alex Masalovich » Thu Mar 22, 2018 10:04 pm

That is, this problem is not associated with any change. It's strange.
Try the calibration function in other applications: TCA and TTA.
Just in case, check also this:
https://support.tacx.com/hc/en-us/artic ... resistance
Тренируйтесь много, отдыхайте ещё больше!

Vorpal
Posts: 5
Joined: Mon Feb 19, 2018 12:07 am

Re: Flow smart calibration

Post by Vorpal » Fri Mar 23, 2018 7:23 pm

Tried it on the tca and after a couple of attempts it calibrated, then tried it on the utility app and is now Calibrating on that as well. Thank you for your help.

Post Reply

Return to “Apple”

Who is online

Users browsing this forum: No registered users and 1 guest