Help connect trainer to software TT3 (T1980)

All info on TTS3

Moderators: mcorn, Tacx Moderator, malfukt, Nasz, Lunatix

Post Reply
Pellas
Posts: 1
Joined: Fri Feb 02, 2018 7:30 pm

Help connect trainer to software TT3 (T1980)

Post by Pellas » Wed Feb 07, 2018 9:57 pm

Hi,
I got a Bushido T1980 with an ANT+Sport antenna T1991 and trying to set up this system.
The software is Tacx Trainer 3.11.0 and I got problem to create a new user. The button will not light up.
According to the Support it won`t light up before I connect the trainer to the software.The y say that as sonn I start cycling it would connect and the button would light up. But this doesn´t work.
Is there someone out there who had the same problem or have any suggestions how to solve this?
Thanks
Magnus

User avatar
Alex Masalovich
Moderator
Posts: 1624
Joined: Sun Nov 30, 2014 10:17 pm
Contact:

Re: Help connect trainer to software TT3 (T1980)

Post by Alex Masalovich » Thu Feb 08, 2018 6:42 pm

It's possible that the problem is in this device:
Pellas wrote:
Wed Feb 07, 2018 9:57 pm
with an ANT+Sport antenna T1991
T1991 is a very old model for USB 1.1.
Тренируйтесь много, отдыхайте ещё больше!

mcorn
Moderator
Posts: 7181
Joined: Fri Nov 24, 2006 8:55 pm
Location: USA, Bellingham, Washington

Re: Help connect trainer to software TT3 (T1980)

Post by mcorn » Thu Feb 08, 2018 7:18 pm

Alex Masalovich wrote:
Thu Feb 08, 2018 6:42 pm
It's possible that the problem is in this device:
Pellas wrote:
Wed Feb 07, 2018 9:57 pm
with an ANT+Sport antenna T1991
T1991 is a very old model for USB 1.1.

Good catch Alex. The T1991 is worthless. The only use I ever found for it was doing firmware updates using a standalone Tacx firmware update program.

In addition, it is not ANT+. It is ANT.

Post Reply

Return to “Tacx Trainer Software 3”

Who is online

Users browsing this forum: No registered users and 2 guests