Satori Smart - Calibration issues

Satori, Swing, Sirius, Speedmatic, Rollers

Moderators: malfukt, Tacx support, mcorn, Tacx Moderator, Fortius Magical Man, Nasz

User avatar
Alex Masalovich
Posts: 2007
Joined: Sun Nov 30, 2014 10:17 pm

Re: Satori Smart - Calibration issues

Post by Alex Masalovich » Sat Jan 13, 2018 7:32 pm

tucorides wrote:
Sat Jan 13, 2018 1:00 am
Problem solved - thank you for mentioning the firmware upgrade.
I've never done one in the two years I've owned the Satori.
Just ran it now (took 5 seconds), did the calibration, and seemed normal.
Please tell us the version number of the firmware. This can be useful for other users.
Тренируйтесь много, отдыхайте ещё больше!

Posts: 9
Joined: Fri Jan 12, 2018 1:34 pm

Re: Satori Smart - Calibration issues

Post by tucorides » Thu Jan 18, 2018 6:02 pm

Hi there - so the version I installed, which got things working again, was 0.5.4, and this was January 2018 as I did all this.

I didn't notice the previous version that was on my Satori Smart... but I think it was a 0.4something.

thanks again.

Posts: 2
Joined: Fri Jan 19, 2018 11:55 am

Re: Satori Smart - Calibration issues

Post by Huggyhotspur » Fri Jan 19, 2018 12:12 pm

Hi, I found my wattages were low compared to my perceived effort on sufferfest so downloaded the utility app. I could then never get to see the line in the middle, always said it was too loose. Having read this thread I did the update and it worked immediately and I was able to centre the line. However, I did a 32 min ride, wattages were in my ball park but it measured a huge speed increase. I averaged 37.7mph and a 20 mile ride in the time. Clearly this is wrong or I've missed my calling. Any ideas why this would be?

Post Reply

Return to “Cycletrainers - Rollers”

Who is online

Users browsing this forum: No registered users and 1 guest