Neo set up quick release

Moderators: mcorn, Tacx Moderator, Tacx Video Production, malfukt, Steve Newton, Tacx support, JörgenJ

Post Reply
Posts: 1
Joined: Fri Apr 06, 2018 9:00 pm

Neo set up quick release

Post by chrisalbin » Fri Apr 06, 2018 9:10 pm

just set up my Neo
the QR skewer only came with one spring is this an error? if not which side should the spring be or do i need the springs at all?

thank you for any advice

User avatar
Alex Masalovich
Posts: 2089
Joined: Sun Nov 30, 2014 10:17 pm

Re: Neo set up quick release

Post by Alex Masalovich » Fri Apr 06, 2018 11:01 pm

There should be two springs:


However, the missing spring can be taken from any other quick release skewer.
Тренируйтесь много, отдыхайте ещё больше!

User avatar
Posts: 1895
Joined: Sat Oct 07, 2006 9:06 pm
Location: USA, Houston, TX

Re: Neo set up quick release

Post by ms6073 » Mon Apr 09, 2018 2:22 pm

While it is disappointing that the spring has gone missing, the purpose of these springs on the quick release is to facilitate the ease with which the wheel can be engaged and removed from the dropouts on the bike frame.
TTS 4.19.1 | T2800 NEO Smart
MSI GS70 Laptop | Windows 10 x64 | Intel Core i7-4710HQ 2.40 GHz | 16 Gb DDR3 1600 MHz | GeForce GTX 870M
Samsung 32" LED TV

Post Reply

Return to “General Training topics”

Who is online

Users browsing this forum: No registered users and 1 guest