T2240 Gear setup

Moderators: JörgenJ, mcorn, Tacx Moderator, Tacx Video Production, malfukt, Steve Newton, Tacx support

Post Reply
dirk7603
Posts: 2
Joined: Thu Nov 02, 2017 10:25 am

T2240 Gear setup

Post by dirk7603 » Thu Nov 02, 2017 10:29 am

Hi @ all,

I have a new T2240 and yesterday I completed my first CP-20 test on this model.

During the test, the system recommends a gear ratio for warm-up etc. Is it possible to setup the correct gear from my bike?

For ex. the recommendation was 39-27 but I do not have this gear ratio.

Greetings...
Dirk

User avatar
Alex Masalovich
Moderator
Posts: 1648
Joined: Sun Nov 30, 2014 10:17 pm
Contact:

Re: T2240 Gear setup

Post by Alex Masalovich » Thu Nov 02, 2017 10:44 am

Do not take the recommendations too literally.
Choose another suitable ratio:
http://www.bikecalc.com/gear_ratios
Тренируйтесь много, отдыхайте ещё больше!

dirk7603
Posts: 2
Joined: Thu Nov 02, 2017 10:25 am

Re: T2240 Gear setup

Post by dirk7603 » Thu Nov 02, 2017 10:49 am

Hi Alex,

for me it´s ok - I adjusted the gears that it were suitable for me during the test.

My thoughts were that there might be a config screen somewhere in the system.

User avatar
Alex Masalovich
Moderator
Posts: 1648
Joined: Sun Nov 30, 2014 10:17 pm
Contact:

Re: T2240 Gear setup

Post by Alex Masalovich » Thu Nov 02, 2017 11:07 am

You can make new info boxes (on the top panel to select Training => new info boxes). This option is only available for the training functions Workouts (Catalyst), Tacx Films and GPS Rides. This is not available for built-in tests.
Тренируйтесь много, отдыхайте ещё больше!

Post Reply

Return to “General Training topics”

Who is online

Users browsing this forum: No registered users and 1 guest